Skip to content
LedCommerce
Cart

Deterministic engineering calculation

LED solution designer

Describe your screen and we calculate the resolution, the module/cabinet grid, the number of receiving cards, the player/controller and the port distribution from officially sourced product data. There is no AI guesswork; every recommendation comes from rules and with its reasoning.

  1. 1

    Screen size and resolution

    Choose the screen size and its module or cabinet; the resolution is calculated from them.

    Cabinet planning
    Input method
    How will you enter the size?
    pcs
    pcs

    1 panel: 32 × 16 cm

    cm Optional — for comparison with the requested size.
    cm
    mm
    px
    px

    Module / cabinet

    Optional: the module size is needed for a receiving card plan.

    Optional: the module/cabinet resolution is needed for a receiving card plan.

    Unit type
    An MG cabinet is 96 × 96 cm. The screen is always built from whole cabinets; where the size does not divide into whole cabinets, only the part left over at the edge gets a cabinet cut to size (in steps of 32 cm in width and 16 cm in height). At P2.5 and coarser pixel pitches every cabinet has a single receiving card.
    Choosing one fills in the module size and resolution; you do not need to know the resolution. Pixel pitch of the module inside the cabinet. The modules per cabinet and the cabinet resolution are calculated from it.
    Quick fill:
    cm
    cm
    px If left blank, it is calculated as size ÷ pixel pitch.
    px
    If the size does not divide evenly

    The requested size is never changed silently; the difference is shown on the result page.

  2. 2

    Installation

    Environment
    Installation type
  3. 3

    Content and operation

    These answers determine whether a player or a synchronous controller is needed.

    Where will the content come from? (select all that apply)
    Playback mode
    Is there internet on site?
  4. 4

    Manufacturer preference

    The receiving card and the controller are always chosen from the same manufacturer's ecosystem.

    Advanced

The result includes the size calculation, the receiving card and controller recommendation, the reasoning, the port topology and animated installation steps.