S20
Sender / controller · S Series
- Capacity8.85 MP
- Outputs20 × RJ45
- Max. width8,192 px
- ModeSynchronous
Official product image — source: Colorlight.
Colorlight · Receiving card
E120
Fully verified
Manufacturer class: Receiving Card
Cost-oriented Colorlight receiving card with integrated HUB75 interfaces. A single card loads up to 192×1024 pixels and supports up to 24 groups of parallel data or 32 groups of serial data.
Price
A quote tailored to your project
The price is provided with the quote, based on quantity, delivery address and project scope.
The price of this product is set by quote. Add it to your cart and request the quote together.
- Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
- Compatibility checkCompatibility with the other components is checked during configuration.
- Order trackingShipping and installation status is tracked on your order page.
Key specifications
View Technical Details- Capacity
- 131.1 K px
- Area
- 128×1024
- Data groups
- 24
Planning a complete display?Let's calculate the system that works with this device together.
Calculate
- Start comparing
- Official product page
- Official specification / manual (V1.1.0) opens from the manufacturer's page
Best suited for
- Driving a cabinet or module group of up to 128 × 1,024 pixels with a single card.
- Permanent installations that need temperature / voltage monitoring.
Key features (manufacturer)
- Single card loads up to 192×1024 pixels (PWM chips); 128×1024 with normal chips, 162×1024 with Shixin chips
- 24 groups of parallel RGB data and 32 groups of serial RGB data, expandable to 128 serial groups
- 12 integrated HUB75 interfaces (J1~J12)
- Supports up to 1/128 scan
- 8bit video source input, 240Hz frame rate
- Pixel-to-pixel calibration in brightness and chromaticity (8bit)
- Loop redundancy and firmware program redundancy with readback
- Dual RJ45 Gigabit network ports, input/output auto-identified
Capacity and loading area
The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 131,072 px.This figure is for modules with conventional driver chips; the datasheet states 196,608 px for modules with PWM driver chips.
Technical specifications
- Backup / redundant line
- Pixel calibration
- Monitoring (temperature / voltage)
Capacity and outputs
- Loading capacity
- 131,072 px
- Official loading area
- 128 × 1,024 px
- Port speed
- 1 Gbps
- Data groups
- 24
- HUB interface
- HUB75 ×12
- Max. scan
- 1/128
Inputs and playback
- Color depth
- 8 bit
- Max. frame rate
- 240 Hz
Physical
- Dimensions
- 145.2mm(5.72") × 91.7mm(3.61") × 18.4mm(0.72") (L×W×H)
- Weight
- 95g / 0.21lbs
- Operating temperature
- -25°C~75°C (-13°F~167°F)
- Input voltage
- DC 3.8~5.5V
- Power consumption
- 3.0W
Manufacturer-specific technical data
In the manufacturer's own wording (the original English terms are kept).
Capacity
- Loading capacity (Overview)
-
Single card can load up to 192×1024 pixels
- Control area - normal chips
-
128×1024 pixels
- Control area - PWM chips
-
192×1024 pixels
- Control area - Shixin chips
-
162×1024 pixels
- Data group
-
- 24 groups of parallel RGB full color data and 32 groups of serial RGB data, which can be expanded to 128 groups of serial data
- data groups can be exchanged freely
Network
- Network ports
-
Network port A / B: RJ45, dual network ports can enter and exit at will, the system will automatically identify
- Ethernet port transmission rate
-
1Gb/s
- Communication distance
-
Recommended: CAT5e cable ≤100m
Interfaces
- HUB interface
-
HUB75 Interface, J1~J12 connected to display modules
- Power connectors
-
Power 1 / Power 2: DC 3.8V~5.5V, only use one of them
Control
- Bit error monitoring
-
Monitor the total number of data packets and error packets to check network quality
- Redundancy
-
Loop redundancy and firmware redundancy
- Optional functions
-
Shaped screen
Display
- Chip support
-
Normal chips, PWM chips, Shixin chips
- Scan type
-
Up to 1/128 scan
- Module specifications supported
-
Module of any row and column within 13312 pixels
- Data folded
-
- Normal chips 2~8 fold horizontally, 2~4 fold vertically.
- PWM and Shixin chips horizontal or vertical 2~8 fold
- Video source input
-
8bit color depth video source input and output
- Frame rate
-
23.98/24/29.97/30/50/59.94/60Hz, and outputs 120/240Hz high frame rate (it will affect the load)
- Pixel-to-pixel calibration
-
Brightness calibration 8bit, chromaticity calibration 8bit
Electrical
- Voltage
-
DC 3.8~5.5V, 0.6A
- Rated power
-
3.0W
Physical
- Size
-
L×W×H / 145.2mm(5.72")×91.7mm(3.61")×18.4mm(0.72")
- Weight
-
95g / 0.21lbs
- Operating environment
-
-25°C~75°C (-13°F~167°F), 0%RH-80%RH, no condensation
Sources
Source note
Loading capacity is recorded for conventional driver chips (128×1024 = 131,072 px); the specification states 192×1024 for PWM chips and a separate figure for Shixin chips (see the Capacity rows). 'Shaped screen' is listed as an optional function (p4).
- E120 Classic Receiving Card
- Official product image — E120
- E120 Specification V1.1.0
Dataset: 2026.10.09-2 · last verified: Oct 6, 2026
Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.
Colorlight controllers from the same ecosystem
System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.
Alternatives in the same category
